MT 5
MT5 REVOLVING CENTRE FITTED WITH STANDARD TIP
| Max Run Out | Max RPM | Hardness of TIP | Hardness Of Shank |
| 0.015 mm | 4500 | 60-63 HRC | 32-40 HRC |
MT5 REVOLVING CENTRE FITTED WITH COPYING TIP
| Max Run Out | Max RPM | Hardness of TIP | Hardness Of Shank |
| 0.015 mm | 4500 | 60-63 HRC | 32-40 HRC |
MT5 REVOLVING CENTRE FITTED WITH PIPE TIP
| Max Run Out | Max RPM | Hardness of TIP | Hardness Of Shank |
| 0.015 mm | 4500 | 60-63 HRC | 32-40 HRC |
Spare Pipe Centre TIP
| D1 | D2 | P | Ordering Number | ERP Code | |
|---|---|---|---|---|---|
| 66 | 28 | 45 | P/N 120.202.0 | FLCMT502003 | |
| MT 5 | 96 | 58 | 45 | P/N 120.203.0 | FLCMT502007 |
LOAD-SPEED CHARACTERISTICS of MT5
